3D Robotics 3DR Y6 DIY Kit - Manual (Page 12)

11
To collapse the legs, remove the bolts and nuts from the inner holes where the legs attach to
the arms.
Travel position Flight position
Remove nut and bolt
from inner hole.
Fold.
FOLDING
Your Y6 can fold for ease of transport. To collapse the blue arms, remove thumb nuts and bolts
from outer holes, and slide blue arms toward black arm.
Fold.
Remove thumb nuts and
bolts from outer holes.
Travel position Flight position
Visit copter.ardupilot.com to learn about multicopter safety, hardware
and software configuration, using autonomous flight modes, tuning,
designing missions with waypoints and events, troubleshooting, and
more. For customer support, contact us at [email protected] or
call our support line at +1 (858) 225-1414 M-F 8-5 PST. Happy flying!
ESCs and wiring secured with zip ties
Ensure that all wires are secured so they
will not become entangled in spinning
propellers, are not too tight around corners
(no hard 90-180 degree bends), and do not
pull on the APM or other components.