3D Robotics 3DR DIY Quad User Manual
Page 22
22
2 Assemble propeller adapters
Select the propeller adapters and
the longer screws provided with the
adapters. Do not use the x-shaped
plate. Apply threadlocker to the three
small screws included with the
propeller adapters (less than one
drop covering four to five threads).
Attach an adapter to the top of each
motor.
3 Add propellers
Your Quad uses SF and SFP
propellers. These propellers are
labelled on the package and on the
propeller itself. Add SF and SFP
propellers to the arms shown in the
diagram below with the writing on
the propeller facing towards the sky.
The right propeller order and
orientation is critical for your
copter to fly correctly. Add the
washer above the propeller, and
secure the nut tightly on top.
Ensure that the writing on the propellers faces the
sky.