Rockwell Automation 7000 DPI Wireless Interface Module - Manual (Page 29)

Configuring the WIM 3-7
A. With the “Where is your destination?” screen ( Figure 3.10 )
displayed and “Remote” selected, tap Next -> to display the
“Bluetooth Browser” screen (
Figure 3.11 ) that lists the detected
Bluetooth devices. Select the device to which you want to
connect, and tap OK. Pocket DriveExplorer for Pocket PC will
connect to the Bluetooth device.
B. If the device has more than one network card, you will be
prompted to select one ( Figure 3.12 ), and then tap Next ->. If
not, Pocket DriveExplorer for Pocket PC will display a message
indicating that no network cards were found to support this
routing feature. Therefore, a “Local - point-to-point” connection
is required.
Figure 3.12 “More than one network card…” Screen
Figure 3.10 “Where is your
destination?” Screen
Figure 3.11 Bluetooth Browser
Screen