Rockwell Automation 20P PowerFlex DC Drive - Frame D Switching Power Supply Fuse Replacement User Manual
Page 3
Advertising
3
5. Disconnect the HIM communication cable from the connector on the upper
right corner of the Control board and remove the bottom cover.
6. Loosen the eight hexalobular screws that secure the protective plastic cover
to the control pan and remove the cover.
Pull tabs out
to disconnect
cable.
P F C - X X
Loosen
screws
Loosen
screws
Loosen
screw
Loosen
screw
Switching Power
Supply board
Advertising