Rockwell Automation 20L-RESPRE-A1 PowerFlex 700L Frame 3A and 3B Input Filter Precharge Resistor Kit - Manual (Page 6)

6 PowerFlex® 700L Frame 3A and 3B Input Filter Precharge Resistor Kit (20L-RESPRE-A1)
2. Mount the kit using the four (4) new M6 x 16 mm (0.63 in.) long
Taptite
®
hex head screws from the kit. Tighten the screws to the torque
shown in the drawing below.
Screw, Taptite Hex Head
M6 x 16 mm Long
4 Places
Screw, Phillips Slot Head
M5, 3 Places
10 mm
5.4 N-m
(48 lb.-in.)
Phillips #2
3.9 N-m
(35 lb.-in.)
Frame 3A
Screw, Phillips Slot Head
#6, 3 Places
Phillips #1
1.0 N-m
(9 lb.-in.)
Frame 3B
Screw, Taptite Hex Head
M6 x 16 mm Long
4 Places
10 mm
5.4 N-m
(48 lb.-in.)
Screw, Phillips Slot Head
M5, 3 Places
Phillips #2
3.9 N-m
(35 lb.-in.)
Screw, Phillips Slot Head
#6, 3 Places
Phillips #1
1.0 N-m
(9 lb.-in.)