Rockwell Automation 20P PowerFlex DC Drive - Frame B Cooling Fan - Manual (Page 3)

PowerFlex® DC Drive - Frame B Cooling Fan 3
2. Locate the cooling fan terminal block, between the fans, on the bottom
of the drive and loosen the screws that secure the fan power supply
wires (red and black) to the terminal block and remove the wires.
Important: Note the color and location of each of the wires connected to
the terminal block to ensure that each wire is properly
connected during installation.
3. Using a flathead screwdriver, carefully pry the cover plate off of the fan
housing.
= Loosen screws and remove wires
Remove fan
cover plate