Rockwell Automation 20P PowerFlex DC Drive Communication Interface Cable - Manual (Page 5)

PowerFlex® DC Drive Communication Interface Cable 5
4. Disconnect the Communication Interface cable from the connector on
the upper right corner of the Control board.
5. Disconnect the Communication Interface cable from the connector on
the inside of the top protective cover of the drive.
Step 3: Install the
Protective Covers and New
Communication Interface
Cable Install the protective covers and new Communication Interface cable in
reverse order of removal as in Step 2:
Remove the Protective Covers and the
Existing Communication Interface Cable on page 2 .
Related Documentation Allen-Bradley publications are available on the internet at
www.rockwellautomation.com/literature .
Pull tabs out
to disconnect
cable.
All Frames (Frame A shown)
=
For . . . Read this document
Publication
Number
In depth information regarding the
operation of PowerFlex Digital DC
drives User Manual - PowerFlex Digital DC Drives 20P-UM001…