Rockwell Automation 20P PowerFlex DC Drive - Frame D Snubber Capacitors User Manual
Rockwell Automation Equipment
PowerFlex® DC Drive
Frame D Snubber Capacitors
Installation Instructions
What This Kit Includes
• Six snubber capacitors
• Six nuts and washers
Tools That You Need
• T15 Hexalobular screwdriver
• Socket wrench
• Pliers
What You Need to Do
To install the snubber capacitors:
❐ Step 1: Remove power from the drive
❐ Step 2: Remove the protective covers
❐ Step 3: Remove the existing snubber capacitors
❐ Step 4: Install the new snubber capacitors
❐ Step 5: Install the protective cover and document the change
ATTENTION: Only qualified personnel familiar with DC drives
and associated machinery should plan or implement the installation,
start-up and subsequent maintenance of the system. Failure to comply
may result in personal injury and/or equipment damage.
ATTENTION: To avoid an electric shock hazard, ensure that all
power to the drive has been removed before performing the following.