Rockwell Automation 23P PowerFlex DC Stand-Alone Regulator (SAR) Field Circuit Board - Manual (Page 8)

8 Rockwell Automation Publication 23P-IN003A-EN-P - June 2011
Step 7: Document
the Change 1. Record the installation of the new field circuit board and date of installation on the
field installed option label on the side of the SAR (as shown below).
2. Replace the SAR covers in the reverse order of removal. See Remove the Covers
on page 3 .
3. Install DPI cable (if present).
Additional
Resources These documents contain additional information concerning related Rockwell Automation
products.
You can view or download publications at
http://www.rockwellautomation.com/literature . To order paper copies of technical
documentation, contact your local Rockwell Automation distributor or sales representative.
Resource Description
PowerFlex DC Stand-Alone Regulator and Gate Amplifier User
Manual, publication
23P-UM001
Provides installation instructions and connection and configuration information
for the PowerFlex DC Stand-Alone Regulator (SAR).
PowerFlex Digital DC Drive User Manual, publication 20D-UM001 Provides additional installation, configuration, and programming information for
the PowerFlex DC Stand-Alone Regulator (SAR).
Industrial Automation Wiring and Grounding Guidelines, publication
1770-4.1
Provides general guidelines for installing a Rockwell Automation industrial
system.
Product Certifications website, http://ab.rockwellautomation.com Provides declarations of conformity, certificates, and other certification details.