Rockwell Automation 23P PowerFlex DC Stand-Alone Regulator (SAR) Fan Assembly - Manual (Page 3)

Rockwell Automation Publication 23P-IN006A-EN-P - June 2011 3
5. Remove the fan mounting bracket screws (4).
6. Dispose of the fans properly.
Step 3: Install the New Fan
Assembly Install the new fan assembly in reverse order of removal.
Fan Mounting
Screws (4)
Hand Tighten
Mount the Fans with the Wiring Harness
at the Top of the Fan Assembly
IMPORTANT Be sure that the fan is installed onto the fan mounting bracket with the
directional arrows positioned as shown in the figure below.
Fan Directional
Arrows in Relation
to the Fan
Mounting Bracket.