Rockwell Automation 45FSL General Purpose Fiber Optic Sensors - Manual

Installation Instructions
PHOTOSWITCHr Bulletin 45FSL General Purpose Fiber Optic Sensors
IMPORTANT: SAVE THESE INSTRUCTIONS FOR FUTURE USE.
Product Description
The 45FSL is a DIN rail mountable fiber optic photoelectric
sensor with sophisticated part detection capabilities. Possible
modes of sensing include transmitted beam, diffuse and
retroreflective, allowing the 45FSL to be used in a variety of
complex applications.
Summary of 45FSL Features
S
High-speed response—30 µ s
S
High-intensity LEDs—penetrate dusty environments for
reliable detection of targets
S
Dual LED indicators
S
Output (orange), stability (green)
S
Red or white source LEDs
S
Selectable 40ms off delay output timer—“Pulse
stretcher” useful in high speed applications when the output
pulse must be lengthened to allow time for the machine
logic to respond.
S
DIN rail mountable—for installation convenience, a steel
bracket is supplied for specific mounting requirements
S
“Power-Bus” option—interface which allows user to
jumper power on several DIN rail mounted units to reduce
unnecessary wiring
S
Cross-talk protection—prevents cross-talk between 4 or 8
sensors
S
Short circuit, reverse polarity, false pulse and transient
noise protection
45FSL photoelectric sensors are designed for use with glass
or plastic fiber optic cables up to 2.2mm diameter. An adaptor
is supplied with the sensor for use with 1.25mm diameter
plastic fiber optic cables. No tools are required to attach or
remove fiber optic cables.
Accessories
S
Mounting bracket: Quantity 1
S
Instruction manual: Quantity 1
S
Fiber adaptor: Quantity 1
General Specifications
Model
NPN Type 45FSL-2LGE 45FSL-5LGE 45FSL-2LVE 45FSL-5LVE
Model
PNP Type 45FSL-2LHE 45FSL-5LHE 45FSL-2LWE 45FSL-5LWE
Light Source Red LED White LED Red LED White LED
(Wave Length) (660nm) Ċ (660nm) Ċ
Response Time 250µs or 500µs 30µs
Current
Consumption
NPN: 35ma/PNP: 40ma 35ma max
Power Supply 12 to 24V DC "10% Ripple 10% or less
Range Depends on Fiber
Output Mode Open Collector
NPN Rated: 100ma @ 30V DC Max, <1V Residual
PNP Rated: 100ma @ 30V DC Max, <1V Residual
Stability Output Open Collector
NPN Rated: 100ma @ 30V DC Max, <1V Residual
PNP Rated: 100ma @ 30V DC Max, <1V Residual
Operation Mode Light on/dark on selectable
Output Timer Off delay/On delay selectable
Delay time: 40ms fixed
Indicators Orange LED = Output, Green LED = Stability
Interference
Protection
Yes
Short Circuit
Protection
Yes
Features Power bus for easy wireless power distribution
Material Polycarbonate
Wiring Cable 2m (6.5ft) or pin pico QD connector or PB QD conĆ
nector
Operating
Temperature
-25_C to +55_C (-13_F to 131_F)
Operating Humidity 35% to 85% RH
Operating
Environment
NEMA 1, IP 40
Vibration 10-55Hz, 1mm amplitude, meets or exceeds
IEC 60947-5-2
Shock 10g, 3 directions, 3 times
Approvals CE marked for all applicable directives