Rockwell Automation 1203-SSS Smart Self-powered Serial Converter - Manual (Page 19)

Configuring the Serial Converter 3-3
With DriveExplorer software, you can edit parameters in both the serial
converter and the connected product. On a PowerFlex drive (or other
DPI product), you can also edit parameters in any of the attached
peripherals. DriveExplorer Lite is shipped with the serial converter. It is
a free, limited-feature version of DriveExplorer.
DriveExplorer Lite Quick Start
This section is designed to help users start using DriveExplorer Lite. If
you are unsure how to complete a step, refer to the online help (select
Help > Help Topics) or the DriveExplorer Getting Results Manual,
Publication 9306-5.2, which is included on the CD.
Figure 3.1 DriveExplorer
Using DriveExplorer
Step
1
Select Explore > Configure Communication. Select the communications port
and baud rate that you are using. Select either checksum and accept the default
time for the time-out.
2 Select Explore > Connect > Local. A node eventually appears under Devices.
3 In the left pane, click the + signs to expand the tree. Click the product or serial
converter to display parameters in the right pane. Double-click a parameter to edit
it.