Brother FAX-3800 - Manual (Page 9)

vii
Quick Reference Guide
Sending Faxes
Automatic Transmission
1
Place the original face down in the
ADF.
2
Enter the fax number using One
Touch (FAX models only), Speed
Dial, Search or the dial pad.
3
Press Fax Start .
Sending a Cover Page
1
Place the original face down in the
ADF.
2
Press Menu/Set , 2 , 2 , 8 .
3
When NEXT FAX ONLY?
appears, press Menu/Set .
4
Press to select ON (or OFF ),
and then press Menu/Set .
5
Press to select a comment, and
then press Menu/Set .
6
Enter two digits to indicate the
number of pages being sent, and
then press
Menu/Set .
7
Press 1 to select additional settings
— OR —Press 2 if you are ready to
fax.
8
Enter the fax number.
9
Press Fax Start .
Real Time Transmission
You can send faxes in real time.
1
Place the original face down in the
ADF.
2
Press Menu/Set , 2 , 2, 6.
3
Press to select ON , and then
press Menu/Set—OR—
For the next transmission only,
press to select NEXT FAX
ONLY , and then press Menu/Set.
4
For the next fax only, press to
select ON , and then press Menu/
Set.
5
Press 1 to select additional settings
—OR—Press 2 to fax.
6
Enter the fax number.
7
Press Fax Start.
Receiving Faxes
Select Receive Mode
Press Receive Mode to select
FAX ONLY , FAX/TEL ,
TAD:ANSWER MACH. or
MANUAL . If you select
FAX/TEL , make sure to set Ring
Delay and F/T Ring Time.
Manual Reception
1
Pick up the handset.
2
Press Fax Start if you hear fax
tones (beeps).
3
When the LCD shows
RECEIVING , replace the handset.
or
or
or
or
or
Q U I C K R E F E R E N C E G U I D E