Step 7: installing the shields, Step 8: documenting the change – Rockwell Automation 20L PowerFlex 700L Frame 3A DC Bus Bar Conversion Kit User Manual
Page 6
www.rockwellautomation.com
Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444
Europe/Middle East/Africa: Rockwell Automation, Pegasus Park, De Kleetlaan 12a, 1831 Diegem, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640
Asia Pacific: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846
Power, Control and Information Solutions Headquarters
U.S. Allen-Bradley Drives Technical Support - Tel: (1) 262.512.8176, Fax: (1) 262.512.2222, Email: [email protected], Online: www.ab.com/support/abdrives
Publication 20L-IN004A-EN-P – September, 2006
P/N 181694-P01
Copyright © 2006 Rockwell Automation, Inc. All rights reserved. Printed in USA.
Step 7: Installing the
Shields
1. Align six (6) holes in the Front Shield with holes in the top cover and
assemble six (6) plastic rivets. Apply force with the malleable hammer
as required to completely install the plastic rivets.
2. Align five (5) holes in the Rear Shield with holes in the top cover and
assemble five (5) plastic rivets. Apply force with malleable hammer as
required to completely install the plastic rivets.
Step 8: Documenting the
Change
1. Record the change on the Field Installed Option label. Use a marker to
write in the kit catalog number (SK-L1-DCBS1-F3).
2. Replace the power module lower front cover.
DANGER
PORT
POWER
STS
MOD
NET A
NET B
FIELD INSTALLED OPTIONS
Firmware
#:
Date
Firmware
20-HIM
28-IO-
20-COMM-
20B_-DB1-
HIM
I/O
COM Module
Internal Dynamic Brake
#:
Date
Power Module
Lower Front Cover
Cutaway