Rockwell Automation 42JT_JS VisiSight Competitive Replacement Kit Installation Instructions - Manual

Installation Instructions
42JT or 42JS VisiSight™ Competitive Replacement Kit
IMPORTANT: SAVE THESE INSTRUCTIONS FOR FUTURE USE.
Description
The competitive bracket is designed to transition competitive
sensors to the Allen-Bradley 42JT or 42JS VisiSight product family.
The small footprint stainless steel bracket is intended to simplify
mounting using the existing mounting holes.
The kit includes:
• Left-side mounting bracket
• Right-side mounting bracket
• Mounting hardware
To install the 42JT or 42JS VisiSight:
1. Un-install and remove the competitive photoelectric sensor
from your machine.
2. Select the left or right mounting bracket as appropriate.
3. Insert the tab on the bracket into the mounting hole of the
42JT or 42JS VisiSight.
4. Hold the mounting bracket and 42JT or 42JS VisiSight in
position on the mounting surface, aligned with the mounting
holes.
5. Secure with the short and long M3 screws provided, as shown.
Mounting Considerations
42JT
42JS
3.29 (0.1)
16.09 (0.6)
2.52 (0.1) 14.22 (0.6)