Rockwell Automation 20Y PowerFlex Active Front End in IP20 2500 Encl. Fr. 13 Right-Side Bus Splice Kit User Manual
Installation instructions, Additional resources
Advertising
Table of contents
Document Outline
- PowerFlex Active Front End in IP20 2500 MCC Style Enclosure Frame 13 Right-Side Bus Splice Kit Installation Instructions
- Additional Resources
- Where the Kit Is Used
- What the Kit Contains
- Right-side Connection
- Step 1: Remove power from the AFE.
- Step 2: Remove left side covers from the enclosure being connected to the AFE.
- Step 3: Remove the AFE enclosure right side covers to access the bus bars.
- Step 4: Connect the MCC bus and PE ground splices to the AFE bus and ground bars, respectively.
- Step 5: Attach both enclosures using the air barrier panels and hardware supplied in the barrier kit (catalog number SK-Y1-MCCBARRIER).
- Step 6: Connect the MCC bus and PE ground splices in the AFE enclosure to the bus and ground bars, respectively, in the other enclosure.
- Back Page / Publication 20Y-IN004A-EN-P October 2014