Rockwell Automation 20P-RES-A0 PowerFlex DC Drive Resolver Feedback Option Module - Manual (Page 10)

10 Rockwell Automation Publication 20P-IN071B-EN-P - June 2011
PowerFlex
®
DC Drive Resolver Feedback Option Module
2. Carefully insert the long pins of the stacker connectors into connectors P2
and P3 on the back of the resolver feedback option board.
3. Carefully insert the stacker connectors on the back of the resolver feedback
option board into connectors P2 and P3 (identified in the previous
illustration) on the resolver interface board.
IMPORTANT The end of the stacker connectors with the long pins must
connect to the mating connectors (P2 and P3) on the resolver
feedback option board. The end of the stacker connectors with
the short pins must connect to the mating connectors (P2 and
P3) on the resolver interface board.
Resolver feedback
option board
Long pins of stacker connector mate
with resolver feedback option board
Side view
Resolver interface board
P2 and P3
connectors
Short pins of stacker connector mate
with resolver interface board connectors
P2 and P3
connectors