Rockwell Automation 20B PowerFlex 700 Repl. Parts General Info - Frames 7-10 - Manual

Installation Instructions
20B-IN016B-EN-P
PowerFlex 700 Replacement Parts General Information
Component replacement instructions can be found in the following publications
which are available online at:
www.rockwellautomation.com/literature.
Before replacing any component, read the following:
For additional PowerFlex 700 drive information, refer to the following
publications online at:
www.rockwellautomation.com/literature.
Title Publication
PowerFlex 700 Drive Components Replacement - Frame 7 20B-IN017
PowerFlex 700 Drive Components Replacement - Frame 8 20B-IN024
PowerFlex 700 Drive Components Replacement - Frame 9 20B-IN025
PowerFlex 700 Drive Components Replacement - Frame 10 20B-IN026
ATTENTION: This drive contains ESD (Electrostatic Discharge) sensitive
parts and assemblies. Static control precautions are required when
installing, testing, servicing or repairing this assembly. Component
damage may result if ESD control procedures are not followed. If you are
not familiar with static control procedures, reference A-B publication
8000-4.5.2, “Guarding Against Electrostatic Damage” or any other
applicable ESD protection handbook.
ATTENTION: Only qualified personnel familiar with adjustable frequency
AC drives and associated machinery should perform maintenance/repair of
the system. Failure to comply may result in personal injury and/or
equipment damage.
ATTENTION: To avoid an electric shock hazard, verify that the voltage on
the bus capacitors has discharged before performing any work on the
drive. Measure the DC bus voltage at the +DC & –DC terminals of the
Power Terminal Block (refer to the User Manual for location). The voltage
must be zero.
Title Publication
PowerFlex 700 Series B User Manual 20B-UM002
Frame 7-10 Installation Instructions 20B-IN014
Wiring and Grounding Guidelines for PWM AC Drives DRIVES-IN001
Preventive Maintenance of Industrial Control and Drive System Equipment DRIVES-TD001
Safety Guidelines for the Application, Installation and Maintenance of Solid
State Control SGI-1.1
A Global Reference Guide for Reading Schematic Diagrams 100-2.10
Guarding Against Electrostatic Damage 8000-4.5.2