Rockwell Automation 45LPT Optical Label Sensor - Manual

Installation Instructions
PHOTOSWITCHr Bulletin 45LPT Optical Label Sensor
45LPT-1LEB1-P4
IMPORTANT: SAVE THESE INSTRUCTIONS FOR FUTURE USE.
Description
The 45LPT is an optical label sensor designed exclusively for
the detection of standard or opaque labels on a high speed
web. The 45LPT provides a solution for the packaging
industry. Applications include label counting, web detection,
“double sheet” detection, and mark detection on a translucent
film.
Using transmitted beam technology the 45LPT senses the
leading edge of a label sending a discrete NPN or PNP output
within 50 microseconds which is compatible with most control
circuits found in factory automation systems. Other features
include “One Touch” teachable capabilities using either the
teach button on the sensor or remotely with a pushbutton
switch. For easy installation and versatility this sensor is
equipped with a 4-pin pico connector.
The 45LPT label sensor maintains all ratings that are
necessary for all applicable industries today: IP65, CE, cULus.
Features
S
“One Touch” local and remote teach capability
S
10 to 30V DC operation
S
Fast 50
µsec response time
S
NPN/PNP output
S
User interface lockout feature
S
IP65 Housing
S
Industrial anodized aluminum housing
S
cULus listed and CE marked for all applicable directives
Specifications
Approvals UL and cUL and CE marked for all applicable
directives
Sensing Beam Nonpulsed IR
Sensing Gap 3mm (0.12in)
Supply Voltage 10-30V DC
Current Consumption 40mA maximum
Circuitry Protection Reverse polarity, transient, overload, short circuit
protection
Output Configuration NPN (current sinking) or PNP (current sourcing)
Light Operate: Normally open circuits that conduct
with target present
Dark Operate: Normally closed circuits that
conduct with target absent
User Configuration Local and remote teach
Output Rating 100mA (NPN or PNP)
Response Time 50 microseconds
Adjustments Sensitivity (teach button)
Housing Material Anodized aluminum
Environmental Ratings IP65
Connections 4Ćpin DC pico (M8) connector
Operating Temperature -20_C to +60_C (-4_F to 140_F)
Leakage Current 12V Supply: 0.78mA @ 10mA load, 6.9mA @
100mA load
24V Supply: 0.30mA @ 10mA load, 3.0mA @
100mA load
Power-on Delay 350ms