Rockwell Automation 842E EtherNet/IP Multi-Turn Encoders - Manual

Publication #10000169360 Ver 02 — July 2012
Installation Instructions
842E EtherNet/IP™ Encoders
High Resolution with DLR
IMPORTANT: SAVE THESE INSTRUCTIONS FOR FUTURE USE.
Description
The 842E is an ultra-high resolution encoder with EtherNet/IP interface. These encoders
provide 18-bit single-turn resolution and 30-bit multi-turn resolution. The EtherNet/IP
encoder is targeted for high performance and reliability in harsh industrial
environments. Encoder includes an embedded EtherNet/IP switch to connect additional
E/IP capable product in series and/or support a Device Level Ring (DLR) for ethernet
media redundancy.
Features
• EtherNet/IP
• Embedded switch
• Hardware/software IP address setting
• Resolution up to 30 bits
• Protection class up to IP67
• Simple and fast set up
• Device Level Ring (DLR)
• Revolution divisor
• Solid and blind hollow shaft options
Configurable Parameters Typical Applications
• Counting direction • Packing machines
• Counts per resolution • Robotics
• Counts of revolution • Printing machines
• Preset value • Rotary table positioning
• Velocity unit
• IP address
ENGLISH: This instruction sheet is available in multiple languages at
www.rockwellautomation.com/literature. Select the publication language before
typing in the search field.
CHINESE SIMPLIFIED:
CHINESE TRADITIONAL:
FRENCH:
GERMAN:
ITALIAN:
JAPANESE:
KOREAN:
PORTUGUESE:
SPANISH:
Specifications
 Without packaging.
 To condensation not permitted.
 To DIN EN 60068-2-27.
 To DIN EN 60068-2-6.
 With mating connector inserted.
Certifications CE Marked for all applicable directives
Electrical
Bus Connection EtherNet/IP IEC 61784-1
Transmission Rate 10/100 MBit/s
Transmission Medium Cat-5e cable
Code Type Binary
Operating Voltage Range 10…30V
Power Consumption 3.0 W
Resolution 262,144 (18 bit)
No. of Revolutions, max. 4,096 (12 bit)
Error Limits ±0.03°
Repeatability ±0.002°
Operating Current, max., no load;
10…30V supply
200 mA
Mechanical
Moment of Inertia 6.2 gcm 2 (solid shaft) of the rotor
35 gcm 2 (blind hollow shaft) of the rotor
Operating Speed 9,000 RPM (solid shaft), max.
6,000 RPM (blind hollow shaft), max.
Shaft Loading Radial: 80 N max. (solid shaft)
Axial: 40 N max. (solid shaft)
Permissible Shaft Movement Radial (static/dynamic): ± 0.3 / ± 0.05 mm [of drive element (blind
hollow shaft)]
Axial (static/dynamic): ± 0.5 / ± 0.1 mm [of drive element (blind
hollow shaft)]
Bearing Lifetime 3 x 10 9 revolutions
Angular Acceleration 5 x 10 5 rad/s², max.
Operating Torque 0.3 Ncm (solid shaft) @ 20 °C
0.6 Ncm (blind hollow shaft) @ 20 °C
Starting Torque 0.5 Ncm (solid shaft) at 20°C
0.8 Ncm (blind hollow shaft) at 20°C
Environmental
Housing Material Aluminum
Shaft Material Stainless steel
Operating Temperature [C (F)] -30… +85° (-22… +185°)
Storage Temperature [C (F)]  -40… +100° (-40… +212°)
Relative Humidity  90%
Shock  100 g/6 ms
Vibration  20 g/10…2000 Hz
Enclosure Type Rating  IP67 (IEC 60529)
Weight 0.2 kg (0.44 lb)
Standards EN 61000-6-2 and EN 61000-6-3 EMC