Rockwell Automation 21G PowerFlex 755 AC Drives Cabinet Blower Assembly Kit - Frames 8-10 - Manual (Page 3)

Rockwell Automation Publication 750-IN026A-EN-P - March 2012
PowerFlex 755 AC Drives Cabinet Blower Assembly 3
Remove Blower Assembly 1. Remove power from the drive.
Follow the Remove Power from the Drive procedure starting on page 1.
2. Remove the ten hexalobular screws that secure the blower assembly to the
drive cabinet.
3. Pull the blower assembly off the cabinet.
4. Disconnect the power cable.
Clean Sealing Surface 1. Carefully remove any gasket material that may be stuck to the sealing
surface.
2. Clean the sealing surface with a 50% isopropyl alcohol / 50% water
mixture.
T25