Rockwell Automation 160 Supplement-160-NX3 Chassis Mount Series C - Manual (Page 10)

6 160-NX3 Series C Drive
Dimensions
Important: Bulletin 160 drives installed in user supplied enclosures are
mounted to allow the heatsink to extend outside the enclosure. Use
the information below in combination with the enclosure
manufacturer’s guidelines for sizing.
Clearances: There must be a minimum of 12.5 mm (0.5 in.) around
all sides of the drive module, 100 mm (4 in.) on the top and bottom
of the heatsink, and 50 mm (2 in.) on the sides of the heatsink.
➊ 120 mm (4.72 in.) with DeviceNet accessory.
175
(6.89)
98
(3.86)
114
(4.49)
130
(5.12)
145
(5.71)
Customer
Panel
210
(8.27)
92
(3.63)
55
(2.16)
➊
97.5
(3.84)
195
(7.68)
179
(7.05)