Rockwell Automation 440L Safety Interface M8200 Relay Module - Manual (Page 6)

Operating instructions
M 8200
74 75035-119-01(A) / K832 / 26-09-00 © Rockwell Automation • Milwaukee, Wisconsin • All rights reserved
Warning
1.3 Level of information
These operating instructions contain information on how to
install, place in operation and operate the device. Official and
legal regulations are always to be observed; it is not possible
here to also provide comprehensive information on these basic
requirements. In Germany, the trade association directives
(ZH 1/597) in particular are to be observed.
1.4 Symbols used
Some information in these operating instructions is especially
marked to provide you with a quick reference.
A note provides information on special features of the device.
An explanation communicates basic knowledge.
A recommendation assists in taking the best action.
Warning !
Always read warnings carefully and heed them conscientiously.
The device can only fulfil its safety-relevant task if it is
correctly used, that is "safely" – i. e. fail-safe – fitted and
connected.
The safety interface M 8200 conforms to the safety
requirements as per safety category type 4 in accordance
with pr EN 50 100.
Note
Explanation
Recommendation
About this Document
Chapter 1