Rockwell Automation 198E-C0S4R Plastic Encl. for DOL and Reversing Starter - Manual (Page 2)

Assembly of Reversing Starters
2 1
3
Assemble the reversing starter:
• Place the mechanical interlock
between contactors
• Insert the dovetail connector
from rear side
• Attach the parallel connection
on line side
• Attach the reversing connection
and the overload relay on load side
Snap the starter combination onto the metal hat rail in the enclosure base.
Snap the 800F contact blocks onto the device support:
• Pos. 1 (left): N.O. contact
• Pos. 2 (center): N.C. contact
• Pos. 3 (left): N.O. contact
Do the control wiring according the wiring diagram / wiring table.
Mount the 800F push button operators into the cover.
(2)