Cable bend radius, Ccut-l- xxx cable wiring diagram, 1326-ccut-l- xxx – Rockwell Automation 1326-xxxx High-Resolution Feedback Cables User Manual
Page 2
Publication 1326A-IN026B-EN-P - April 2007
2
PN 191174
Supersedes Publication 1326A-5.26 - August 1998
Copyright © 2007 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
326-CCUT-L-xxx Cable Wiring Diagram
Cable Bend Radius
The table and diagram depict the minimum bend radius for cables. Bend
radius is the tightest (minimum) curvature allowed without potential damage
to the cable.
Allen-Bradley, Rockwell Automation, and TechConnect are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are the property of their respective companies.
Pair #4: Black
Pair #4: White
Shield
Pair #3: Black
Pair #3: Red
Shield
Pair #2: Black
Pair #2: Blue
Shield
Shield
Connector
Pin
A
B
C
D
E
F
G
H
Pair #2: Black
Pair #2: Green
Shield
I
J
Motor Power Cable Catalog Number
1326-CCUT-L-xxx
BR
1
mm (in.)
(1)
(1)
Bend radius (BR) is the specified minimum bend radius for cable assemblies. For standard
cable, BR is a one-time flex application. BR may vary on user-fabricated cables. Flex cables
have a much higher BR to withstand flex applications.
101.6 (4.0)
BR
Bend Radius