Rockwell Automation 1336E IMPACT AC Drv Frn Upgrade - Manual (Page 2)

2 1336 IMPACT
™
AC Drive Firmware Up-Grade Procedure
necessary to remove the cradle of the Human Interface Module. On
the larger drives (B-H Frames), the Current Processor IC may be
located under the GMx Module, if the drive is so equipped.
4. Locate the Language Module for your specific drive.
5. Remove the module by squeezing the sides - in, and pulling the
module up & away from the MCB. Discard module.
6. Position the new Language Module on the Main Control Board,
using the silk screen outline on the board as a guide.
7. Carefully align the module connector with the Main Control Board
connector. Firmly press the module onto the board until fully seated.
The module will “snap” (lock) in place. This completes the
Language Module replacement.
All Other Frames
LAN GUAGE
M OD ULE ALLEN-BRAD
LEY
JOG
ESC
SE L
Frames A1 – A4
Language Module
LANG
UA GE M ODU LE
ALLE N-BRA
DLEY
Current
Processor
Current
Processor
LANGUAG
E M
ODULE ALLEN-BRADLEY
LANGUAGE MODULE
ALLEN-BRADLEY