Rockwell Automation 1394-FK10TS_FK22TS Fan Kit Installation Instructions User Manual
Page 4
4 1394 Fan Kit
Publication 1394-IN067A-EN-P — January 2005
3. Press fan kit downward, with bracket tabs inserted between vent
slots, until snap-locks click into place (refer to Figure 2).
Figure 2
1394 Fan Kit Installed Over the System Module
4. Verify the fan wiring is not routed under the fan and bracket.
IMPORTANT
Verify the fan kit kW rating matches the system
module kW rating. Mismatched fan kits will not
align properly with the vent slots.
ATTENTION
To avoid equipment damage, do not route the
fan wiring under the bracket. Keep fan wiring out
of the way while pressing fan and bracket down
onto the system module.
Bracket flush with
the panel and back
of system module.
1 2 3 4 5 6 7 8 9 10
11 12 13
1394
x-SJT22-x (22 kW)
system module is shown
For use
with
22 kW
Modules
Fan wires