Rockwell Automation 1336T FORCE Language Module Replacement - Manual (Page 2)

1336 FORCEt Language Module Replacement 2
❏ 3. Remove the module by squeezing the
sides - in, and pulling outward. Discard
module.
LAN
GU AG E M
OD ULE
ALL
EN -BR
AD LEY
❏ 4. Position the new Language Module on
the board, using the silk screen outline on
the board as a guide.
❏ 5. Carefully align the module connector
with the board connector. Firmly press the
module onto the board until fully seated.
The module will “snap” (lock) in place.
❏ 6. Replace drive cover and check for proper
operation.
Important: Each module contains English
and an alternate language. The
factory default setting for the
[Language] parameter is
“English.” To program and
operate the drive in the alternate
language, the [Language]
parameter must be programmed
to the alternate language.
LAN
GU AG E M
OD ULE
ALL
EN -BR AD LEY
1336 FORCE is a trademark of Allen-Bradley Company, Inc.