Rockwell Automation 1426-MxE-xxx PowerMonitor 5000 Unit Catalog Number Upgrade Installation Instructions - Manual (Page 7)

Rockwell Automation Publication 1426-IN005A-EN-P - December 2013 7
PowerMonitor 5000 Unit Catalog Number Upgrade
9. On the Summary dialog box, click Finish.
10. On the dialog box regarding upgrading the target device, click Yes.
11. On the Update Status dialog box, click OK to confirm that the upgrade is
complete.
12. Check the device webpage to confirm that the catalog number is upgraded
correctly.
13. Exit the ControlFLASH utility.
TIP The catalog number upgrade takes about one minute to complete. When the
download is complete, wait about two more minutes to let the device restart,
reestablish connection, and confirm that the upgrade was successful.
TIP If a Class 1 data connection exists, the catalog number does not upgrade
effectively and the Update Status window reports a message stating ‘The target
device is not in a proper mode to accept an update’. Verify that no Class 1 data
connections exist before upgrading the catalog number.