Rockwell Automation 1408-UPxx Powermonitor 1000 Unit Upgrade Kit - Manual (Page 4)

Publication 1408-IN002A-EN-P - May 2007 PN 40055-253-01(1)
Supersedes Publication XX - XX Copyright © 2007 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
10. When complete, close the ControlFlash utility and confirm that the firmware
was updated.
Additional Resources
For more information regarding the Powermonitor 1000 unit, see these
publications.
You can view or download publications at
http://literature.rockwellautomation.com. To order paper copies of technical
documentation, contact your local Rockwell Automation distributor or sales
representative.
Rockwell Automation, Allen-Bradley,Powermonitor 1000, ControlFlash, RSLinx, Rockwell Software, and Powermonitor are
trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
TIP
Early revisions of Powermonitor 1000 firmware only report back the main
module firmware number. This causes the upgrade to appear to be
unsuccessful. Verification in this instance can be performed by viewing the
new catalog number on the LCD display, serial communication port, web page
interface, or external Rockwell Software applications. For Powermonitor 1000
units, revision 2.xx and later, this is no longer the case.
Resource Description
Powermonitor 1000 Unit Installation Instructions,
publication 1408-IN001 Provides information on how to install and set up the
Powermonitor 1000 unit.
Powermonitor 1000 Unit User Manual, publication
1408-UM001 Provides information on memory organization,
communication command summary, explicit
messaging, SCADA applications, and the unit’s data
tables.