Rockwell Automation 1609-5000CCT Isolation Step-Down Transformer - Manual (Page 4)

2
Receiving and Handling
Receiving and Handling
Unpacking
Inspect the transformer upon receipt. Accidents and damage may occur during shipment.
Notify the carrier and dealer if there is any damage.
The shipping materials are recyclable. Save them for later use, or dispose of them properly.
Check the package contents.
– Transformer
– Front Bezel
– Literature kit containing:
• Bulletin 1609-P Series User Manual CD
• Quick Start Guide
• Three tie brackets; Two screws
Specifications
Contact Information Refer to Rockwell Automation at 440-646-5800.
Temperature
Operating
32 ° to 104 ° F (0 ° to 40 ° C)
This unit is intended for indoor
use only. Select a location sturdy
enough to handle the weight.
Do not operate this unit where
there is excessive dust or the
temperature or humidity are
outside the specified limits.
Ensure that the air vents on the
front and rear of the unit are not
blocked.
Humidity 0 to 95% relative humidity, non-condensing
Weight 125 lbs (57 kg)