Rockwell Automation 1608P ProDySC User Manual, 100/110 A - Manual (Page 14)

14 Rockwell Automation Publication 1608P-IN002B-EN-P - May 2014
Chapter 2 Installation
Bypass Terminations The recommended bypass switch input and output terminals are located inside
the bypass enclosure. All terminals are labeled and a wiring diagram is provided
inside the door, as shown in
Figure 8 . The numbered switch positions correspond
to the numbered modes in Figure 2 . The N terminals should not be used with 3-
wire ProDySC models.
Figure 8 - Bypass Connection