Rockwell Automation 1397 Enhanced Field Supply - 3010, 3020 - Manual (Page 8)

1397 Enhanced Field Supply Card 8
1397-5.24 March, 2005
— Front —
100-150 HP/230V Drives
200-300 HP/460V Drives
— Inside Right Side Panel —
400-600 HP/460V Drives
— Top —
40-75 HP/230V Drives
75-150 HP/460V Drives
— Top —
1.5-30 HP/230V Drives
3-60 HP/460V Drives
TORQUE 14-10GA 35 LB.-IN. 0 GA 48 LB.-IN. SPEC
GND
DANGER
CIRCUIT BREAKER DOES NOT DISCONNECT INCOMING A0
LINE POWER IT ONLY PROVIDES DC FAULT PROTECTION. LE DISCONECTEUR NE COUPTE PAS L'AUTOMENTATION DU SPOTEUR IL NES
SERT QUE A ASSURER UNE PROTECTION CONTRE LES DESFAULTS DC. 810903-2424
! DANGER
RISK OF ELECTRICAL SHOCK. DISCONNECT INPUT
POWER BEFORE SERVICING EQUIPMENT. P/N 33145
6FU 7FU 8FU
6FU 7FU 8FU
6FU 7FU 8FU
A
B
C
581
583
582
X1 X2
H1 H2
F2/35 CT LINE
F1/37
❏
9 Replace fuses 6FU, 7FU & 8FU with the (3) UL class
CC/600V/25A fuses included with the kit.
Locate the replacement fuse table on the back of the carrier.
Attach one of the adhesive fuse rating labels (P/N 179540) over
the 600V 15A designations as shown in the illustration.
Installation, Cont’d