Rockwell Automation 1203-FB1 FLEX I/O SCANport Base - Manual (Page 6)

FLEX I/O SCANport
t
Base Installation Instructions 1–6
1203-5.7ML- April 1996
European Union Directive Compliance
If this product has the CE mark it is approved for installation
within the European Union or EEA regions. It has been designed
and tested to meet the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC Electromagnetic Compatibility
(EMC) and the following standards, in whole or in part, documented in a technical
construction file:
EN 50081-2 EMC – Generic Emission Standard, Part 2 – Industrial Environment
EN 50082-2 EMC – Generic Immunity Standard, Part 2 – Industrial Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This productive is tested to meet Council Directive 73/23/EEC
Low Voltage, by applying the safety requirements of EN 61131–2
Programmable Controllers, Part 2 – Equipment Requirements and
Tests.
For specific information required by EN 61131-2, see the appropriate sections in this
publication, as well as the following Allen-Bradley publications:
Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1
Guidelines for Handling Lithium Batteries, publication AG-5.4
Automation Systems Catalog, publication B111