Rockwell Automation 1426-COMM-DNT PowerMonitor 5000 Unit Optional Communication Modules - Manual (Page 3)

Rockwell Automation Publication 1426-IN001A-EN-P - July 2012
PowerMonitor 5000 USB Driver Installation and Configuration 3
Install Drivers You can download drivers from
http://www.ab.com/linked/PEMS/downloads.html .
Follow the steps listed below to install the USB driver.
1. Connect the PowerMonitor 5000 unit to your computer by using a USB
cable and apply power to the power monitor.
The computer detects the new device and prompts you to install the driver.
2. Click ‘Yes, this time only’ and click Next.
3. Click Install from a list or specific location (Advanced) and click Next.