Rockwell Automation 1398 H-Series Brushless Servo Motor Manual - Manual (Page 8)

H-4000 Series NEMA 56C Motors
MOTOR DIMENSION - Without Brake With Brake
Motors in/mm in/mm Note:
NEMA 56C motors are manufactured to
inch dimensions. Millimeter dimensions
are approximate conversions from
inches.
H-4030 NEMA 56C 8/39/213 10.47/266
H-4050 NEMA 56C 10.39/264 12.48/317
H-4075 NEMA 56C 12.40/315 14.49/368
SUPPLEMENTAL MOTOR DIMENSIONS
Length, from motor faceplate to center of connectors
Brake Power Encoder
Motors (in/mm) (in/mm) (in/mm)
H-4030 --- 7.24/184 7.24/184
H-4030 Brake 6.30/160 9.29/236 9.29/236
H-4050 --- 9.25/235 9.25/235
H-4050 Brake 8.31/211 11.30/287 11.30/287
H-4075 --- 11.26/286 11.26/286
H-4075 Brake 10.31/262 13.30/338 13.30/338
Intro
Intro
1.41
0.61
Length
(see motor dimension table above)
0.6250
0.6245 DIA
3/16 SQ X 1 3/8
KEY SUPPLIED
4.500
4.497 DIA
0.706
0.691
6.50
3/8” - 16 THRU
(4)
MOTOR WILL ACCEPT 47mm X20mm X 7mm
SHAFT SEAL (optional, not included)
0.1875