Rockwell Automation 931S-V1R1D-MC1R Isolator, Monitoring User Manual
Page 5
Advertising
3
3.
Configuring the module
3.1
Required tool
A screwdriver with a 2.5-mm blade is required to set the
module and to connect the conductors to the terminals.
3.2
To open the module
Remove the connector. Disen-
gage the locking mechanism by
lightly pressing the locks on both
sides of the housing
ቢ, remove
the upper part of the housing
and the electronics
ባ.
1
2
1
Advertising