Rockwell Automation 1441-DYN25-MBMP Bump Test Extension Module for the Dynamix 2500 - Manual (Page 20)

20 Rockwell Automation Publication 1441-UM002A-EN-P - May 2011
Chapter 2 Bump Test Extension Module
• Press P (7) to move the cursor to the next significant peak.
• Press H (4) to display the harmonic cursors. Each time you press H, it
toggles through the functions.
Save a Bump Test Setup
and Measurement You can save the Bump Test setup parameters and measurements to a file that you
can recall at a later time. You can save a Bump Test setup and measurement any
time the Save function appears on the screen.
The Dynamix 2500 data collector stores bump test measurements in
comma-separated value format (.csv) in the Internal Disk/Analyzer folder. These
.csv files can be viewed with the Microsoft Excel software.
Follow these steps to save a file.
1. Take a reading.
2. Press F2 (Save).
The Bump Test - Save Data screen appears.
Table 3 - Significant Peak Functions
On pressing H Function
Once Enables the harmonic cursors. Press the Left and Right arrows to move the
harmonic cursors.
Twice The cursor line is displayed with the harmonic cursors. Press the Left and
Right arrows to move only a single cursor, leaving the harmonic cursors
locked in position.
Thrice Turns the harmonic cursors off; use only a single cursor.
Peak Find cursor
Harmonic cursor