Rockwell Automation 1395 ControlNet Communication Board - Manual (Page 79)

8–7 Reference
Publication 1395.5.37 – March, 1999
Parameters This section describes in detail the function of each of the parameters
on the CNA board.
Parameter 400 – [A>CntlNet In 0]
Parameter 300 – [B>CntlNet In 0]
Use: ControlNet Input word #0
Parameter Type: Fast Source
Program Terminal Units: None
Minimum Value: (Link Dependent)
Maximum Value: (Link Dependent)
Default Value: None
Description: This parameter is a fast source that contains the first
word or group of data from the PLC controller output image table.
Parameter 401 – [A>CntlNet In 1]
Parameter 301 – [B>CntlNet In 1]
Use: ControlNet Input word #1
Parameter Type: Fast Source
Program Terminal Units: None
Minimum Value: (Link Dependent)
Maximum Value: (Link Dependent)
Default Value: None
Description: This parameter is a fast source that contains the second
word or group of data from the PLC controller output image table.
Parameter 402 – [A>CntlNet In 2]
Parameter 302 – [B>CntlNet In 2]
Use: ControlNet Input word #2
Parameter Type: Fast Source
Program Terminal Units: None
Minimum Value: (Link Dependent)
Maximum Value: (Link Dependent)
Default Value: None
Description: This parameter is a fast source that contains the third
word or group of data from the PLC controller output image table.