Wiring diagrams, Dimensions [mm (in.) – Rockwell Automation 873P Ultrasonic Single Analog Output Sensors Installation Instructions User Manual
Page 4
Power, Control and Information Solutions Headquarters
Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444
Europe/Middle East/Africa: Rockwell Automation NV, Pegasus Park, De Kleetlaan 12a, 1831 Diegem, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640
Asia Pacific: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846
www.rockwel lautomation.com
4 873P Ultrasonic Single Analog Output Sensors
Publication 873P-IN005A-EN-P—10000678913 Ver 01—October 2014
Copyright © 2014 Rockwell Automation, Inc. All rights reserved. Printed in the USA.
Rockwell Automation maintains current product environmental information on its website at
http//www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page.
Allen-Bradley and Rockwell Automation are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies.
Wiring Diagrams
4
3
1
2
LOAD
-
+
Analog Current
-
+
4-20 mA
HOLD/
SYNC
4
3
1
2
LOAD
-
+
Analog Voltage
-
+
0-10 VDC
HOLD/
SYNC
Solid-state devices can be susceptible to radio
frequency (RF) interference depending on the
power and the frequency of the transmitting
source. If RF transmitting equipment is to be
used in the vicinity of the solid-state devices,
thorough testing should be performed to assure
that transmitter operation is restricted to a safe
operating distance from the sensor equipment
and its wiring.
IMPORTANT
ATTENTION
If a hazardous condition can result from
unintended operation of this device, access to
the sensing area should be guarded.
Dimensions [mm (in.)]
M18
M30
M38
3
(0.12)
M12x1
14
(0.55)
93.2
(3.67)
19.2
(0.76)
2.5
(0.098)
57.5
(2.26)
M18x1)
8.3
(0.33)
3
(0.12)
M12x1
10
(0.39)
99.8
(3.93)
18.2
(0.72)
2
(0.08)
69.6
(2.74)
M30x1.5)
10
(0.39)
8.5
(0.33)
3
(0.12)
M12x1
10.4
(0.41)
100
(3.94)
19.5
(0.77)
1
(0.04)
38.8
(1.53) dia.
M30x1.5)