Rockwell Automation 1786-TCAP INSTL INSTR CONTROLNET TAP DUM - Manual (Page 2)

ControlNet Tap Dummy Load Installation Instructions 2
Publication 1786-5.15 – September 1997
European Union Directive Compliance
This product has the CE mark and is approved for installation within the
European Union and EEA regions. It has been designed and tested to
meet the following directives.
EMC Directive
This product is tested to meet Councl Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards, in
whole or in part, documented in a technical construction file:
•
EN 50081-2EMC – Generic Emission Standard, Part 2 – Industrial
Environment
•
EN 50082-2EMC – Generic Immunity Standard, Part 2 – Industrial
Environment
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low
Voltage, by applying the safety requirements of EN-61131-2
Programmable Controllers, Part 2 – Requirements and Tests.
For specific information required by EN-61131-2, see the appropriate
sections in this publication, as well as the following Allen-Bradley
publications:
•
Industrial Automation Wiring and Grounding Guidelines for Noise
Immunity, publication 1770-4.1
•
Guidelines for Handling Lithium Batteries, publication AG-5.4
•
Automation Systems Catalog, publication B111