Rockwell Automation 1734-485ASC POINT I/O ASCII User Manual - Manual (Page 62)

Publication 1734-UM009B-EN-P - July 2003
B-2 Using the ASCII Modules with the ControlLogix System Application Examples
EDS Configuration
You can configure the ASCII modules through the EDS file using
RSNetWorx for DeviceNet. For this example, the following
configuration was used:
Table B.2 Application Example Configuration
Parameter Value
Maximum receive characters 20
Receive data type Short string (1 byte length)
Handshaking mode Auto increment
Transmit maximum length 20
Transmit string data type Short string (1 byte length)