Rockwell Automation 1734-ADNX POINT I/O DeviceNet Adpater User Manual - Manual (Page 68)

Publication 1734-UM002C-EN-P - July 2003
5-2 Adding the 1734-ADN(X) to the DeviceNet Scanner’s Scanlist
You must follow these steps during configuration:
1. Adding the Adapter to Your Network
2. Setting the Adapter’s Parameters
3. Adding the DeviceNet scanner’s scanlist (see the Quick Start,
Appendix B)
4. Going Online
Adding the Adapter to Your Network
Follow these steps:
1. Start the RSNetWorx for DeviceNet software.
2. Add the adapter as shown below.
The adapter appears
on the network. 1. Expand the list of
communication adapters.
2. Expand the 1734-ADN POINT
I/O DeviceNet Adapter field.
3. You can double-click or click
and drag the scanner name
onto the network.