Rockwell Automation Logix5000 Controllers Messages Programming Manual - Manual (Page 27)

Send a message to multiple controllers Chapter 3
Example:
Type the path to the remote controller.
OR
Click Browse and browse to the remote
controller.
3. In the message_config array, enter the tag name or address of the data in the
first controller to receive the message. Enter the path and remote element
for each additional controller.
4. Enter the path and remote element for each additional controller.
Tag Name Value
message_config {…}
message_config[0]
{…}
message_config[0].Path
message_config[0].RemoteElement
message_config[1] {…}
message_config[1].Path
message_config[1].RemoteElement
Rockwell Automation Publication 1756-PM012F-EN-P - October 2014 27