Rockwell Automation 1771-QRD PULS FLOWMTR User Manual
Page 29
Advertising
Module Programming
Chapter 4
4–11
6.
Enter the Block Transfer Rung found in Figure 4.12 into the
PLC–5/15.
Figure 4.12
Block Transfer Rung for a PLC-5/15 With Remote I/O
7.
Place the PLC–5/15 Processor in RUN mode.
Use the DATA MONITOR to examine data table address N36:0. This is
where the QRD has stored the data from the four channels. They will
appear as:
Only the channels which are actually driven will be active.
Advertising