Rockwell Automation 1757-SWKIT400 ProcessLogix R400.0 Server Installation Instructions - Manual (Page 5)

ProcessLogix R400.0 Server Installation Instructions 5
Publication 1757-IN914A-EN-P - October 2001
Logging on to Windows 2000
1. Press <Ctrl> + <Alt> + <Delete> to initiate Windows 2000 logon.
2. Enter >ps_user< as the User name.
3. Press <Tab> and enter >password< as the default password.
4. Press <Enter> to complete the logon.
Configuring the 1784-PCIC Card
Refer to “1784-PCIC Driver and Firmware Installation” in the ProcessLogix R400.0
Installation and Upgrade Guide for details.
Changing the PC name
Refer to “Changing the Computer Name on a ProcessLogix Server” in the
ProcessLogix R400.0 Installation and Upgrade Guide.
TIP
You must repeat the above steps every time you reboot the
Server.
IMPORTANT
•
The Factory default of your PC Name is PLX1. If you have
more than 1 PC on the same network, you must make certain
that the PC names and addresses are unique (i.e. PLX1,
PLX2).