Important user information – Rockwell Automation 1788-CNFR ControlNet Daughtercard Installation Instructions User Manual
Page 3
ControlNet Daughtercard 3
Publication 1788-IN005A-EN-P - March 2001
Important User Information
Because of the variety of uses for the products described in this publication, those
responsible for the application and use of this control equipment must satisfy
themselves that all necessary steps have been taken to assure that each application
and use meets all performance and safety requirements, including any applicable
laws, regulations, codes and standards.
The illustrations, charts, sample programs and layout examples shown in this guide
are intended solely for purposes of example. Since there are many variables and
requirements associated with any particular installation, Allen-Bradley does not
assume responsibility or liability (to include intellectual property liability) for actual
use based upon the examples shown in this publication.
Allen-Bradley publication SGI-1.1, Safety Guidelines for the Application, Installation
and Maintenance of Solid-State Control (available from your local Allen-Bradley
office), describes some important differences between solid-state equipment and
electromechanical devices that should be taken into consideration when applying
products such as those described in this publication.
Reproduction of the contents of this copyrighted publication, in whole or part,
without written permission of Rockwell Automation, is prohibited.
Throughout this manual we use notes to make you aware of safety considerations:
Attention statements help you to:
•
identify a hazard
•
avoid a hazard
•
recognize the consequences
ATTENTION
ÿ
Identifies information about practices or circumstances that can
lead to property damage or economic loss if procedures are
not followed properly.
WARNING
ÿ
Identifies information about practices or circumstances that can
lead to personal injury or death if procedures are not followed
properly.
IMPORTANT
Identifies information that is critical for successful application
and understanding of the product.