Rockwell Automation 1771-IVN Installation Data dc (10-30V) Input Module - Manual (Page 12)

DC (10–30V) Input Module 12
Publication 1771-IN035B-EN-P - July 2002
Field Wiring Arm 1771ĆWN
Wiring Arm Screw Torque 9 pound-inches (1.0Nm)
Certifications
(when product is marked)
UL UL Listed Industrial Control Equipment
CSA CSA Certified Process Control Equipment
CSA CSA Certified Process Control Equipment for Class I,
Division 2 Group A, B, C, D Hazardous Locations
CE 3 European Union 89/336/EECEMCDirective,
compliant with:
EN 61000-6-4, Industrial Emissions
EN 50082-2, Industrial Immunity
EN 61236, Meas./Control/Lab., Industrial Requirements
EN 61000-6-2, Industrial Immunity
C-Tick 3 Australian Radiocommunications Act, compliant with:
AS/NZS 2064, Industrial Emissions
1 14 gauge wire connected to all terminals may not allow the cover on the field wiring arm to close. A smaller gauge wire may
be used.
2 You use this conductor category information for planning conductor routing as described in publication 1770Ć4.1, Industrial
Automation Wiring and Grounding Guidelines.
3 See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates and other certification details
Publication 1771-IN035B-EN-P - July 2002
Supersedes publication 1771Ć5.35 - October 1995
PN 957678-77
Copyright 2002 Rockwell Automation, Inc. Printed in USA