Rockwell Automation 1794-IA8 INSTL INST 8 INPUT MODULE - Manual (Page 7)

7 120V ac FLEX I/O 8 Input Module (Cat. No. 1794ĆIA8)
Publication 1794Ć5.9
Increasing the Input Delay Time
You can increase the input delay time (DT) for channels 00 through 07. Select the
input delay time by setting the corresponding bits in the output image table
(complementary word) for the module.
For example, to increase the off-to-on delay time to 12ms for an ac input module at
address rack 1, module group 0, set bits 02, 01, and 00 as shown below.
0 1 1
11 10 17 16 15 14 13 12
DT = 00-07
Fill File
Source
Destination
Length
3
#O:010
1
FLL
Write DT to complement
of input module.
O:010
00
I:000
Write Delay Time on system startup.
= 3 Octal or 3 Decimal
09 08 07 06 05 04 03 02 01 00 15 14 13 12 11 10 Dec.
(Octal) 07 06 05 04 03 02 01 00
Delay Times
Bits Description Maximum Delay Time
02 01 00 Delay Time for Inputs 00-07 Off to On On to Off
0 0 0 Delay Time 0 (default) 8.6ms 26.6ms
0 0 1 Delay Time 1 9ms 27ms
0 1 0 Delay Time 2 10ms 28ms
0 1 1 Delay Time 3 12ms 30ms
1 0 0 Delay Time 4 17ms 35ms
1 0 1 Delay Time 5 26ms 44ms
1 1 0 Delay Time 6 43ms 61ms
1 1 1 Delay Time 7 78ms 96ms