Bissell PowerWash Deluxe 1694 series User Manual
Page 13
13
Machine Preparation
Set up machine following instructions in the The Basics
section, pages 6-8. Be sure to thoroughly rinse out any
remaining Fibre Cleansing Formula from the Tank-in-Tank to
prevent slippery linoleum, vinyl, and tile floors.
Use BISSELL Floor Cleansing Formula in the
Tank-in-Tank.
Check ReadyTools dial - it should be set on Floor Cleaning.
Plug into a proper outlet and turn Power Switch on.
Slowly move the machine nozzle with Bare Floor Tool
forward and back over soiled surface one time while
pressing the trigger. Caution: Do not over wet.
Repeat the motion without pressing the trigger using the
Bare Floor Tool to squeegee and suction up the dirty water.
Repeat steps 1 and 2 backing along the exit path.
Allow about 30 minutes for the floor to dry completely.
When the cleaning job is complete refer to the
Maintenance/Storage section on page 14-16.
To remove Bare Floor Tool gently bend long tab (right side)
outward and pull tool down away from nozzle. Rinse
thoroughly, dry and store.
1.
2.
3.
1.
2.
3.
4.
5.
Cleaning Bare Floors Continued
Bare Floor Cleaning Technique
6.